log in | register | forums
Show:
Go:
Forums
Username:

Password:

User accounts
Register new account
Forgot password
Forum stats
List of members
Search the forums

Advanced search
Recent discussions
- Rougol November talk - Mark Moxon (News:4)
- Informal get together for ...velopers on Saturday night (News:)
- Would you like to share yo...p for our Advent Calendar? (News:)
- Mark Moxon is talking at Rougol on Monday (News:)
- WROCC Newsletter Volume 40:6 (News:)
- WROCC November 2022 Meeting - RISC OS Open (News:1)
- WROCC November talk is on thursday night (News:)
- Accessing Microsoft Mail from RISC OS (News:1)
- Archive 26:1 reviewed (News:)
- RISCOSbits announcements for 2022 London Show (News:1)
Latest postings RSS Feeds
RSS 2.0 | 1.0 | 0.9
Atom 0.3
Misc RDF | CDF
Site Search
 
Article archives
Acorn Arcade forums: News and features: Compute Module 4
 
  Compute Module 4
  svrsig (00:47 12/10/2022)
  riscosbits (16:02 14/10/2022)
    svrsig (14:56 25/10/2022)
 
Chris Hall Message #125341, posted by svrsig at 00:47, 12/10/2022
Member
Posts: 35
The compute module 4 was released in October 2020 along with an IO board. The intention was that the IO board could be used for development and a custom PCB would then be designed for the module brining out the precise interfaces that were required.

Several third party IO boards are now available including one from Waveshare (the Mini-IO-board 'B') that offers 2xHDMI, 4xUSB 2, 1xm2.NVMe, Ethernet, WiFi and 40-pin header. The on board RTC and fan controller are invisible to RISC OS.

At present the eMMc and NVMe storage is visible to Linux but not to RISC OS 5.28 but hopefully that should change when RISC OS 5.30 emerges. Otherwise RISC OS 5.28 works well, booting from SCSI, provided that the m.2 slot is populated.

A working CM4 on a Waveshare IO board will be on display at the South West show.

[Edited by svrsig at 01:48, 12/10/2022]

[Edited by svrsig at 01:49, 12/10/2022]
  ^[ Log in to reply ]
 
RISCOS Bits Message #125343, posted by riscosbits at 16:02, 14/10/2022, in reply to message #125341
Member
Posts: 23
I can confirm that, after Chris's discovery that any old PCIe device enabled the CM4 to boot RISC OS (I thought it needed to be a PCIe device with the Pi 4's USB 3 chipset), I have now set up a Waveshare Mini-IO-board to dual boot both RISC OS and Linux without the need for USB drives.

As Chris says, the NVMe drive is invisible to RISC OS, but hey ho! Linux can see it and run nicely from it.
  ^[ Log in to reply ]
 
Chris Hall Message #125353, posted by svrsig at 14:56, 25/10/2022, in reply to message #125343
Member
Posts: 35
Archive 26:1 (out now in PDF and in the next week or so as a printed mag) describes how I got RISC OS 5.28 running on the CM4, dual booting from eMMc into either Linux (on either a USB drive or an m.2 NVMe drive) or RISC OS (on a USB stick) according to a switch on the 40 pin header. A picture of a Waveshare Mini-B IO board with CM4 and 250GB NVMe drive fitted is shown.

[Edited by svrsig at 15:58, 25/10/2022]
  ^[ Log in to reply ]
 

Acorn Arcade forums: News and features: Compute Module 4