If you are interested in coding RISC OS (or just want to see a really good coder in action), then you should be on Youtube on sunday...
Gerph (author of ports, games, OS releases for RISC OS and countless other things!) will be running his second live coding event. This will continue on from the first session (but you did not need to see that for it to make sense) and will continue to develop an ARM debugger module.
The stream can be watched live from 1pm or afterwards here.
| |
Livestream coding session with Gerph this sunday |
| |
gerph (16:28 30/6/2024)
gerph (16:28 4/7/2024)
|
| |
|
Charles Justin Ferguson |
Message #125653, posted by gerph at 16:28, 30/6/2024 |
Member
Posts: 48
|
Thanks to all who came along 
An interesting session - a bit more complicated to do, but worked well.
This session was trying to implement the *DumpI and *MemoryI commands in the module. It seemed a lot harder than it probably ought to have been, but I'm happy with the result.
If you missed the session and want to watch, it's here: https://www.youtube.com/watch?v=-i2_lv3h8tg |
| |
 [ Log in to reply ] |
| |
|
Charles Justin Ferguson |
Message #125654, posted by gerph at 16:28, 4/7/2024, in reply to message #125653 |
Member
Posts: 48
|
The streams have both been updated with timestamps to allow you to jump to distinct sections. This may make the very long stream a little more bearable.
Future streams will most likely be limited to about 3 1/2 hours. |
| |
[ Log in to reply ] |
| |
|
